The M718 Tool Lanyard tethers tools to workers at heights to help prevent injury caused by falling tools. To reduce the risk of
falling objects attach lanyard to tool by securing cord around handle with a simple knot (created by passing the lanyard through a loop made
around the handle). Tighten the plastic, adjustable barrel lock over the knot. Attach lanyard carabiner to an appropriate D-ring on personal
fall protection equipment or tool belt.
SERIOUS INJURY OR DEATH CAN OCCUR DUE TO FAILURE TO COMPLY WITH MANUFACTURER’S INSTRUCTIONS INCLUDED WITH EQUIPMENT AT TIME OF SHIPMENT FROM MANUFACTURER.
Instructions regarding application, limitations, inspection and maintenance should be read prior to applying this equipment. Instructions should be available at all times for reference. Tool components connected to this equipment must be compatible. Connectors and anchorage points must be able to support 75 lbs. static load. This and all components must be inspected prior to each use and at least annually by a competent person. If equipment does not meet inspection criteria outlined in manual and/or if it is subject to dynamic forces remove from service immediately. Avoid contact with sharp edges or abrasive surfaces.